Application Brochures
Cosense patented ultrasonic liquid level sensors are used in a wide variety of applications in equipment installed all over the world. Application Brochures describing specific product families are shown below:
Micromeasurement
Ultrasonic Sensors for the Semiconductor Industry
Low Cost Point Level Switch, Solid State Float™
Miniature Low Cost Sensor, Miniature Sentio™ Sensor
Application Notes
Cosense patented ultrasonic liquid level sensors are used in a wide variety of applications in equipment installed all over the world. Application Notes describing the use of these sensors are grouped below by industry:
       Semiconductor
       Pharmaceuticals and Biotechnology
       Medical Instruments
       Industrial Automation
       Aerospace
       Chemical Process
       Water and Waste Water
       Pulp and Paper
       Power and Utilities
       Petroleum


Semiconductor Applications

Products
AP-032: Precision Wafer Profile/Deflection (Non-contact) ML-101
AP-030: Pipeline Fluid Type/PIG Detection ML-101
AP-028: Tank Level Control (External, Noninvasive, Continuous) ML-101
AP-036: Multiple Liquids in a Single Tank Level Monitoring SL-700
AP-017: Air Bubble Detection (Non-invasive) AD-101
AP-023: Dual Redundant Loop Power Sensors Millennium
AP-022: Pharmaceutical Sterilized (300°F) Sensor SL-1105
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-015: Automatic Coolant Level Control (Non-invasive) SE-601 AD-101
AP-014: Liquid Slug Detection in Gas Chromatograph SE-601 AD-101
AP-013: "Clamp-On" Level Detection (Non-invasive) SE-601 AD-101
AP-010: Vacuum Line Protection with Miniature Sensor LL-101 LL-100 LL-10 LL-01
AP-004: High Pressure / High Purity Multi-point LL-200


Pharmaceutical & Biotech Applications

Products
AP-031: Test Tube Rack Fill Verification (Circular) ML-101
AP-017: Air Bubble Detection (Non-invasive) AD-101
AP-034: Precision Thickness Measurement (Non-contact) ML-101
AP-033: Multi-channel Precision Counting (Non-contact) ML-101
AP-030: Pipeline Fluid Type/PIG Detection ML-101
AP-029: Position/Fill System (Multi-channel) ML-101
AP-028: Tank Level Control (External, Noninvasive, Continuous) ML-101
AP-027: Liquid Level Control (Continuous) ML-101 ML-102
AP-026: Microplate Fill Verification (Non-contact) ML-101
AP-025: Container Fill Verification (Non-contact ) ML-101
AP-024: Diameter Measurement of Extrusions (Non-contact) ML-101
AP-022: Pharmaceutical Sterilized (300°F) Sensor SL-1105
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-015: Automatic Coolant Level Control (Non-invasive) SE-601 AD-101
AP-014: Liquid Slug Detection in Gas Chromatograph SE-601 AD-101
AP-013: "Clamp-On" Level Detection (Non-invasive) SE-601 AD-101
AP-012: Bottle Detection System
AP-010: Vacuum Line Protection with Miniature Sensor LL-101 LL-100 LL-10 LL-01
AP-006: Self-Testing Sensors for Leak Detection LL-101 LL-102 LL-104 LL-105


Medical Instrument Applications

Products
AP-017: Air Bubble Detection (Non-invasive) AD-101
AP-034: Precision Thickness Measurement (Non-contact) ML-101
AP-033: Multi-channel Precision Counting (Non-contact) ML-101
AP-031: Test Tube Rack Fill Verification (Circular) ML-101
AP-029: Position/Fill System (Multi-channel) ML-101
AP-026: Microplate Fill Verification (Non-contact) ML-101
AP-025: Container Fill Verification (Non-contact ) ML-101
AP-024: Diameter Measurement of Extrusions (Non-contact) ML-101
AP-022: Pharmaceutical Sterilized (300°F) Sensor SL-1105
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-015: Automatic Coolant Level Control (Non-invasive) SE-601 AD-101
AP-014: Liquid Slug Detection in Gas Chromatograph SE-601 AD-101
AP-013: "Clamp-On" Level Detection (Non-invasive) SE-601 AD-101
AP-010: Vacuum Line Protection with Miniature Sensor LL-101 LL-100 LL-10 LL-01
AP-006: Self-Testing Sensors for Leak Detection LL-101 LL-102 LL-104 LL-105


Industrial Automation Applications

Products
AP-034: Precision Thickness Measurement (Non-contact) ML-101
AP-033: Multi-channel Precision Counting (Non-contact) ML-101
AP-032: Precision Wafer Profile/Deflection (Non-contact) ML-101
AP-031: Test Tube Rack Fill Verification (Circular) ML-101
AP-029: Position/Fill System (Multi-channel) ML-101
AP-026: Microplate Fill Verification (Non-contact) ML-101
AP-024: Diameter Measurement of Extrusions (Non-contact) ML-101
AP-022: Pharmaceutical Sterilized (300°F) Sensor SL-1105
AP-020: Food Grade Continous Hopper Level Sensor LL-1101
AP-012: Bottle Detection System
AP-010: Vacuum Line Protection with Miniature Sensor LL-101 LL-100 LL-10 LL-01


Aerospace Applications

Products
AP-007: Pump Protection with Non-Invasive Clamp Sensors SE-601 AD-101
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-025: Container Fill Verification (Non-contact ) ML-101
AP-027: Liquid Level Control (Continuous) ML-101 ML-102


Chemical Process Applications

Products
AP-001: Pump Control Using Single Point Level Sensors LL-100 LL-10 LL-01
AP-002: Pump Control Using Dual Point Level Sensor LL-200
AP-004: High Pressure / High Purity Multi-point LL-200
AP-005: Separation Control of Immiscible Liquids LL-200
AP-006: Self-Testing Sensors for Leak Detection LL-101 LL-102 LL-104 LL-105
AP-007: Pump Protection with Non-Invasive Clamp Sensors SE-601 AD-101
AP-008: Liquid/Liquid Interface Detection LL-107
AP-009: Redundant High Level Alarm with Exiting Wiring LL-104
AP-010: Vacuum Line Protection with Miniature Sensor LL-101 LL-100 LL-10 LL-01
AP-011: Slurry Detection and Control LL-394
AP-012: Bottle Detection System
AP-013: "Clamp-On" Level Detection (Non-invasive) SE-601 AD-101 LL-200
AP-014: Liquid Slug Detection in Gas Chromatograph SE-601 AD-101
AP-015: Automatic Coolant Level Control (Non-invasive) SE-601 AD-101
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-017: Air Bubble Detection (Non-invasive) AD-101
AP-018: Tank, Large (Continuous Level Measurement) LL-200
AP-019: Roll Diameter Gage (Non-contact) ML-101
AP-020: Food Grade Continous Hopper Level Sensor LL-1101
AP-023: Dual Redundant Loop Power Sensors Millennium
AP-024: Diameter Measurement of Extrusions (Non-contact) ML-101
AP-025: Container Fill Verification (Non-contact ) ML-101
AP-026: Microplate Fill Verification (Non-contact) ML-101
AP-027: Liquid Level Control (Continuous) ML-101 ML-102
AP-028: Tank Level Control (External, Noninvasive, Continuous) ML-101
AP-029: Position/Fill System (Multi-channel) ML-101
AP-030: Pipeline Fluid Type/PIG Detection ML-101
AP-031: Test Tube Rack Fill Verification (Circular) ML-101
AP-034: Precision Thickness Measurement (Non-contact) ML-101
AP-035: Waste Water/Sludge Facility Level Measurement Millennium
AP-036: Multiple Liquids in a Single Tank Level Monitoring SL-700


Water and Waste Water Applications

Products
AP-001: Pump Control Using Single Point Level Sensors LL-100 LL-10 LL-01
AP-002: Pump Control Using Dual Point Level Sensor LL-200
AP-004: High Pressure / High Purity Multi-point LL-200
AP-005: Separation Control of Immiscible Liquids LL-200
AP-007: Pump Protection with Non-Invasive Clamp Sensors SE-601 AD-101
AP-008: Liquid/Liquid Interface Detection LL-107
AP-009: Redundant High Level Alarm with Exiting Wiring LL-104
AP-011: Slurry Detection and Control LL-394
AP-013: "Clamp-On" Level Detection (Non-invasive) SE-601 AD-101
AP-015: Automatic Coolant Level Control (Non-invasive) SE-601 AD-101
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-017: Air Bubble Detection (Non-invasive) AD-101
AP-018: Tank, Large (Continuous Level Measurement) LL-200
AP-019: Roll Diameter Gage (Non-contact) ML-101
AP-020: Food Grade Continous Hopper Level Sensor LL-1101
AP-027: Liquid Level Control (Continuous) ML-101 ML-102
AP-028: Tank Level Control (External, Noninvasive, Continuous) ML-101
AP-029: Position/Fill System (Multi-channel) ML-101
AP-035: Waste Water/Sludge Facility Level Measurement Millennium
AP-036: Multiple Liquids in a Single Tank Level Monitoring SL-700


Pulp and Paper Applications

Products
AP-001: Pump Control Using Single Point Level Sensors LL-100 LL-10 LL-01
AP-002: Pump Control Using Dual Point Level Sensor LL-200
AP-005: Separation Control of Immiscible Liquids LL-200
AP-007: Pump Protection with Non-Invasive Clamp Sensors SE-601 AD-101
AP-008: Liquid/Liquid Interface Detection LL-107
AP-009: Redundant High Level Alarm with Exiting Wiring LL-104
AP-011: Slurry Detection and Control LL-394
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-018: Tank, Large (Continuous Level Measurement) LL-200
AP-019: Roll Diameter Gage (Non-contact) ML-101
AP-020: Food Grade Continous Hopper Level Sensor LL-1101
AP-023: Dual Redundant Loop Power Sensors Millennium
AP-027: Liquid Level Control (Continuous) ML-101 ML-102
AP-028: Tank Level Control (External, Noninvasive, Continuous) ML-101
AP-030: Pipeline Fluid Type/PIG Detection ML-101
AP-035: Waste Water/Sludge Facility Level Measurement Millennium


Power and Utilities Applications

Products
AP-001: Pump Control Using Single Point Level Sensors LL-100 LL-10 LL-01
AP-002: Pump Control Using Dual Point Level Sensor LL-200
AP-004: High Pressure / High Purity Multi-point LL-200
AP-005: Separation Control of Immiscible Liquids LL-200
AP-006: Self-Testing Sensors for Leak Detection LL-101 LL-102 LL-104 LL-105
AP-007: Pump Protection with Non-Invasive Clamp Sensors SE-601 AD-101
AP-008: Liquid/Liquid Interface Detection LL-107
AP-009: Redundant High Level Alarm with Exiting Wiring LL-104
AP-011: Slurry Detection and Control LL-394
AP-013: "Clamp-On" Level Detection (Non-invasive) SE-601 AD-101
AP-015: Automatic Coolant Level Control (Non-invasive) SE-601 AD-101
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-018: Tank, Large (Continuous Level Measurement) LL-200
AP-019: Roll Diameter Gage (Non-contact) ML-101
AP-020: Food Grade Continous Hopper Level Sensor LL-1101
AP-023: Dual Redundant Loop Power Sensors Millennium
AP-027: Liquid Level Control (Continuous) ML-101 ML-102
AP-028: Tank Level Control (External, Noninvasive, Continuous) ML-101
AP-029: Position/Fill System (Multi-channel) ML-101
AP-030: Pipeline Fluid Type/PIG Detection ML-101
AP-034: Precision Thickness Measurement (Non-contact) ML-101


Petroleum Applications

Products
AP-001: Pump Control Using Single Point Level Sensors LL-100 LL-10 LL-01
AP-002: Pump Control Using Dual Point Level Sensor LL-200
AP-005: Separation Control of Immiscible Liquids LL-200
AP-006: Self-Testing Sensors for Leak Detection LL-101 LL-102 LL-104 LL-105
AP-007: Pump Protection with Non-Invasive Clamp Sensors SE-601 AD-101
AP-008: Liquid/Liquid Interface Detection LL-107
AP-009: Redundant High Level Alarm with Exiting Wiring LL-104
AP-011: Slurry Detection and Control LL-394
AP-016: Wet / Dry Detection (Non-invasive) SE-601 AD-101
AP-017: Air Bubble Detection (Non-invasive) AD-101
AP-018: Tank, Large (Continuous Level Measurement) LL-200
AP-019: Roll Diameter Gage (Non-contact) ML-101
AP-020: Food Grade Continous Hopper Level Sensor LL-1101
AP-023: Dual Redundant Loop Power Sensors Millennium
AP-027: Liquid Level Control (Continuous) ML-101 ML-102
AP-028: Tank Level Control (External, Noninvasive, Continuous) ML-101
AP-029: Position/Fill System (Multi-channel) ML-101
AP-030: Pipeline Fluid Type/PIG Detection ML-101
AP-035: Waste Water/Sludge Facility Level Measurement Millennium
AP-036: Multiple Liquids in a Single Tank Level Monitoring SL-700